Hallite vee packs seal 13
Technical details
| Operating conditions | METRIC | INCH |
| Maximum Speed | 0.5 m/sec | 1.5 ft/sec |
| Temperature Range | -30°C + 100°C | -22°F + 212°F |
| Maximum Pressure | 700 bar | 10,000 p.s.i. |
| Maximum extrusion gap | ||||
| Pressure bar | 160 | 250 | 400 | 700 |
| Maximum Gap mm | 0.4 | 0.3 | 0.2 | 0.1 |
| Pressure p.s.i. | 2400 | 3750 | 6000 | 10,000 |
| Surface roughness | µmRa | µmRt | µinCLA | µinRMS |
| Dynamic Sealing Face Ød1 | 0.1 < > 0.4 | 4 max | 4 < > 16 | 5 < > 18 |
| Static Sealing Face ØD1 | 1.6 max | 10 max | 63 max | 70 max |
| Static Housing Faces L1 | 3.2 max | 16 max | 125 max | 140 max |
| Chamfers & Radii | ||||||
| Groove Section ≤ S mm | 6.0 | 7.5 | 10.0 | 12.5 | 15.0 | 20.0 |
| Min Chamfer C mm | 3.0 | 4.0 | 5.0 | 6.5 | 7.5 | 10.0 |
| Max Fillet Rad r1 mm | 0.4 | 0.4 | 1.2 | 1.6 | 1.6 | 1.6 |
| METRIC | |||
| Part no. | Ød1 | ØD1 | L1 |
| 4204950 | 20 | 32 | 22.5 |
| 4205050 | 25 | 40 | 22.5 |
| 4205150 | 30 | 45 | 22.5 |
| 4205250 | 35 | 50 | 22.5 |
| 4205350 | 40 | 55 | 22.5 |
| 4205450 | 45 | 65 | 27.5 |
| 4205550 | 50 | 70 | 30 |
| 4205650 | 55 | 75 | 30 |
| 4205750 | 60 | 80 | 37 |
| 4205850 | 65 | 85 | 40 |
| 4205950 | 70 | 90 | 40 |
| 4206050 | 75 | 95 | 40 |
| 4206150 | 80 | 100 | 40 |
| 4206250 | 90 | 110 | 40 |
| 4199150 | 100 | 120 | 40 |
| 4206350 | 110 | 130 | 40 |
| 4206450 | 115 | 140 | 46 |
| 4206550 | 125 | 150 | 46 |
| 4206650 | 140 | 165 | 46 |
| 4206750 | 150 | 180 | 60 |
| 4206850 | 160 | 190 | 60 |
| 4206950 | 180 | 210 | 60 |
| 6582150 | 195 | 225 | 62.5 |
| 4207050 | 200 | 230 | 60 |
| 6582350 | 220 | 250 | 62.5 |
| 6582450 | 245 | 275 | 62.5 |
| 6582550 | 270 | 300 | 62.5 |
| 6582650 | 290 | 320 | 64 |
| 6582750 | 320 | 360 | 78 |
| 6584050 | 380 | 420 | 80 |