Hallite pneumatic seal 609
Technical details
OPERATING CONDITIONS | METRIC | INCH |
Maximum Speed | 1.0 m/ sec | 3.0 ft/sec |
Temperature Range | -45°C +80°C | -50°F +180°F |
Maximum Pressure | 16 bar | 230 psi |
SURFACE ROUGHNESS | µmRa | µmRz | µmRt | µinRa | µinRz | µinRt |
Dynamic Sealing Face Ød₁ | 0.1 – 0.4 | 1.6 max | 4 max | 4 – 16 | 63 max | 157 max |
Static Sealing Face ØD₁ | 1.6 max | 6.3 max | 10 max | 63 max | 250 max | 394 max |
Static Housing Faces L₁ | 3.2 max | 10 max | 16 max | 125 max | 394 max | 630 max |
CHAMFERS & RADII | | | |
Groove Section ≤ S mm | 4.00 | 5.00 | |
Min Chamfer C mm | 3.00 | 3.50 | |
Max Fillet Rad r₁ mm | 0.20 | 0.40 | |
Groove Section ≤ S in | 0.125 | 0.187 | 0.250 |
Min Chamfer C in | 0.093 | 0.093 | 0.125 |
Max Fillet Rad r₁ in | 0.008 | 0.008 | 0.016 |
TOLERANCES | Ød₁ | ØD₁ | L₁ |
mm | f9 | js11 | +0.25 -0 |
in | f9 | js11 | +0.010 -0 |

METRIC | | | | |
Part no. | Ød1 | ØD1 | SL | L1 |
4510100 | 12 | 19 | 4.5 | 5 |
4510200 | 16 | 22 | 4 | 4.5 |
4484300 | 20 | 28 | 5.5 | 6 |
4510300 | 25 | 35 | 7.5 | 8 |
4510400 | 32 | 42 | 7 | 7.5 |
INCH | | | | |
Part no. | Ød1 | ØD1 | SL | L1 |
4490200 | 0.625 | 0.875 | 0.25 | 0.275 |
4541700 | 0.75 | 1 | 0.25 | 0.275 |
4541800 | 1 | 1.24 | 0.187 | 0.207 |
4471000 | 1 | 1.25 | 0.25 | 0.275 |
4598300 | 1.125 | 1.375 | 0.187 | 0.207 |
4541900 | 1.25 | 1.5 | 0.25 | 0.275 |
4542000 | 1.375 | 1.625 | 0.25 | 0.275 |
4542100 | 1.5 | 1.875 | 0.25 | 0.275 |
4542200 | 1.75 | 2.125 | 0.312 | 0.344 |
4543800 | 2 | 2.25 | 0.25 | 0.275 |
4483200 | 2 | 2.375 | 0.312 | 0.344 |
4499200 | 2 | 2.625 | 0.312 | 0.344 |
4542300 | 2.5 | 3 | 0.284 | 0.312 |