Hallite rod seal 716SPN
Technical details
| OPERATING CONDITIONS | ||
| metric | inch | |
| Maximum Speed | Up to 1.0m/sec | Up to 3.3ft/sec |
| Temperature Range* | -40 to 100°C | -40 to 212°F |
| Maximum Dynamic Pressure** | 250 bar | 3600 psi |
| When used in Tandem with R16*** | 400 bar | 5800 psi |
| SURFACE FINISH RECOMMENDATIONS | |||||||
| metric | inch | RMR* | |||||
| SURFACE ROUGHNESS | µMRA | µMRZ | µMRT | µINRA | µINRZ | µINRT | |
| Dynamic Sealing Face Ød1 | 0.1 – 0.4 | 1.3 max | 2.5 max | 4 – 16 | 52 max | 98 max | 45% – 70% |
| Static Sealing Face ØD1 | 1.6 max | 7 max | 10 max | 63 max | 276 max | 394 max | |
| Static Housing Faces L1 | 3.2 max | 10 max | 16 max | 125 max | 394 max | 630 max | |
| ENERGIZER TABLE | ||||
| ENERGIZER MATERIAL (SHORE A) | ENERGIZER TYPE | ENERGIZER DESIGNATION | ENERGIZER OPERATING TEMPERATURE°C | ENERGIZER OPERATING TEMPERATURE°F |
| NBR – 70A | O-Ring | N | -30 to 100°C | -22 to 212°F |
| NBR – 70A Low temp. | O-Ring | L | -45 to 80°C | -49 to 176°F |
| FKM – 75A | O-Ring | F | -10 to 200°C | 14 to 392°F |
| EPDM – 70A | O-Ring | E | -45 to 145°C | -49 to 293°F |
| HNBR – 70A | O-Ring | H | -25 to 150°C | -13 to 302°F |
| NBR – 90A | O-Ring | Q | -30 to 100°C | -22 to 212°F |
| HNBR – 90A | O-Ring | U | -25 to 150°C | -13 to 302°F |
| No Energizer* | None | X | – | – |
| INSTALLATION RECOMMENDATIONS | |||||||||||
| metric | |||||||||||
| ROD DIAMETER Ød1 f8/h9 | GROOVE DIAMETER | GROOVE WIDTH | RADIUS | CHAMFER | GROOVE SECTION | RADIAL CLEARANCE G MAX* | O-RING CROSS SECTION | ||||
| DIAMETER RANGE | ØD1 H9 | L1 + 0.2 | R1 | C | S | Up to 100 bar | Up to 200 bar | Up to 400 bar | O-Ring | ||
| Standard Duty Application – R | Light Duty Application – L | Heavy Duty Application – H | |||||||||
| 5.0 – 7.9 | 8.0 – 18.9 | – | d1 + 4.9 | 2.2 | 0.4 | 2.0 | 2.45 | 0.30 | 0.20 | 0.15 | 1.78 |
| 8.0 – 18.9 | 19.0 – 37.9 | – | d1 + 7.5 | 3.2 | 0.6 | 3.0 | 3.75 | 0.40 | 0.25 | 0.15 | 2.62 |
| 19.0 – 37.9 | 38.0 – 199.9 | 8.0 – 18.9 | d1 + 11.0 | 4.2 | 1.0 | 4.0 | 5.50 | 0.50 | 0.30 | 0.20 | 3.53 |
| 38.0 – 199.9 | 200.0 – 255.9 | 19.0 – 37.9 | d1 + 15.5 | 6.3 | 1.3 | 6.0 | 7.75 | 0.70 | 0.40 | 0.25 | 5.33 |
| 200.0 – 255.9 | 256.0 – 649.9 | 38.0 – 199.9 | d1 + 21.0 | 8.1 | 1.8 | 8.0 | 10.50 | 0.80 | 0.60 | 0.35 | 6.99 |
| 256.0 – 649.9 | 650.0 – 1000.0 | 200.0 – 255.9 | d1 + 24.5 | 8.1 | 2.5 | 9.0 | 12.25 | 1.00 | 0.80 | 0.50 | 6.99 |
| 650.0 – 1000.0 | – | 256.0 – 650.0 | d1 + 28.0 | 9.5 | 3.0 | 10.0 | 14.00 | 1.20 | 0.90 | 0.60 | 8.40 |
| > 1000.0 | – | – | d1 + 38.0 | 13.8 | 3.0 | 10.0 | 19.00 | 1.20 | 0.90 | 0.60 | 12.00 |
| inch | |||||||||||
| ROD DIAMETER Ød1 f8/h9 | GROOVE DIAMETER | GROOVE WIDTH | RADIUS | CHAMFER | GROOVE SECTION | RADIAL CLEARANCE G MAX* | O-RING CROSS SECTION | ||||
| DIAMETER RANGE | ØD1 H9 | L1 + .008 | R1 | C | S | Up to 1500 PSI | Up to 2900 PSI | Up to 5800 PSI | O-Ring | ||
| Standard Duty Application – R | Light Duty Application – L | Heavy Duty Application – H | |||||||||
| 0.125 – 0.311 | 0.312 – 0.749 | – | d1 + 0.193 | 0.087 | 0.016 | 0.079 | 0.097 | 0.012 | 0.008 | 0.006 | 0.070 |
| 0.312 – 0.749 | 0.750 – 1.499 | – | d1 + 0.287 | 0.126 | 0.024 | 0.118 | 0.144 | 0.016 | 0.010 | 0.006 | 0.103 |
| 0.750 – 1.499 | 1.500 – 7.874 | 0.312 – 0.749 | d1 + 0.421 | 0.165 | 0.039 | 0.157 | 0.211 | 0.020 | 0.012 | 0.008 | 0.139 |
| 1.500 – 7.874 | 7.875 – 9.999 | 0.750 – 1.499 | d1 + 0.594 | 0.248 | 0.051 | 0.236 | 0.297 | 0.028 | 0.016 | 0.010 | 0.210 |
| 7.875 – 9.999 | 10.000 – 25.499 | 1.500 – 7.874 | d1 + 0.807 | 0.319 | 0.071 | 0.315 | 0.404 | 0.031 | 0.024 | 0.014 | 0.275 |
| 10.000 – 25.499 | 25.500 – 39.999 | 7.875 – 9.999 | d1 + 0.945 | 0.319 | 0.071 | 0.315 | 0.473 | 0.035 | 0.028 | 0.016 | 0.275 |
| 25.500 – 39.999 | > 40.000 | 10.000 – 25.499 | d1 + 1.075 | 0.374 | 0.098 | 0.354 | 0.538 | 0.039 | 0.031 | 0.020 | 0.331 |