Hallite swivel seal 800
Technical details
| OPERATING CONDITIONS | METRIC | INCH |
| Maximum Speed | 0.2 m/sec | 0.6 ft/sec |
| Temperature Range | -30°C + 80°C | -22°F +76°F |
| Maximum Pressure | 350 bar | 5000 psi |
| Limiting PV Value Lubricated | 25 bar m/sec | 1200 psi ft/sec |
| MAXIMUM EXTRUSION GAP | |||
| Pressure bar | 100 | 200 | 350 |
| Housing Length (L₁ ≤ 5 mm) | 0.20 | 0.10 | H7/f7 fit |
| Housing Length (L₁ > 5 mm) | 0.30 | 0.25 | H7/f7 fit |
| Pressure psi | 1500 | 3000 | 5000 |
| SURFACE ROUGHNESS | µmRa | µmRz | µmRt | µinRa | µinRz | µinRt |
| Dynamic Sealing Face Ød₁, ØD₁ | 0.1 – 0.3 | 1.0 max | 2.5 max | 4 – 12 | 40 max | 100 max |
| Static Sealing Face ØD₁, Ød₁ | 1.6 max | 6.3 max | 10 max | 63 max | 250 max | 394 max |
| Static Housing Faces L₁ | 3.2 max | 10 max | 16 max | 125 max | 394 max | 630 max |
| CHAMFERS & RADII | ||
| Groove Section ≤ S mm | 5.50 | 7.75 |
| Min Chamfer C mm | 3.00 | 5.00 |
| Max Fillet Rad r₁ mm | 0.80 | 1.20 |
| TOLERANCES | Ød₁ | ØD₁ | L₁ |
| Rod mm | f9 | H11 | +0.20 -0 |
| Piston mm | h9 | H9 | +0.20 -0 |
| METRIC | |||
| Part no. | ØD1 | Ød1 | L1 |
| 4763300 | 25 | 32.5 | 3.2 |
| 4761300 | 32 | 39.5 | 3.2 |
| 4770600 | 36 | 43.5 | 3.2 |
| 4754400 | 40 | 51 | 4.2 |
| 4743400 | 45 | 56 | 4.2 |
| 4727800 | 70 | 80 | 5 |
| 4777810 | 100 | 111 | 4.2 |
| 4762810 | 100 | 115.5 | 6.3 |
| 4720610 | 130 | 145.5 | 6.3 |
| 4748100 | 80 | 69.3 | 4.2 |
| 4771300 | 90 | 79.3 | 4.2 |
| 4712710 | 145 | 129.5 | 6.3 |
| 4712810 | 160 | 144.5 | 6.3 |
| 4720710 | 180 | 164.5 | 6.3 |