| Technical details | Metric | Inch |
| Operating conditions | ||
| Maximum Speed | 0.5 m/sec | 1.5 ft/sec |
| Temperature Range | -30°C +100°C | -22°F +212°F |
| Maximum Pressure | 400 bar | 6,000 p.s.i. |
| Maximum extrusion gap | Figures show the maximum permissible gap all on one | |||
| side using minimum clearance Ø and maximum bore Ø. | ||||
| Pressure bar | 160 | 250 | 400 | |
| Pressure p.s.i. | 2400 | 3750 | 6000 | |
| Maximum Gap in | 0.024 | 0.02 | 0.016 | |
| Surface roughness | µmRa | µmRt | µinCLA | µinRMS |
| Dynamic Sealing Face ØD1 | 0.1 < > 0.4 | 4 max | 4 < > 16 | 5 < > 18 |
| Static Sealing Face Ød1 Ød2 | 1.6 max | 10 max | 63 max | 70 max |
| Static Housing Faces Ød3 L1 L2 | 3.2 max | 16 max | 125 max | 140 max |
| Chamfers & Radii | |||
| Groove Section ≤ S in | 0.187 | 0.25 | 0.375 |
| Min Chamfer C in | 0.156 | 0.187 | 0.25 |
| Max Fillet Rad r1 in | 0.01 | 0.016 | 0.016 |
| Max Fillet Rad r2 in | 0.01 | 0.016 | 0.016 |
| Inch |
| Part no. | ØD1 | Ød1 | L1 |
| 6111919 | 1.5 | 1.125 | 0.452 |
| 2391410 | 1.75 | 1.375 | 0.452 |
| 2326319 | 2 | 1.5 | 0.587 |
| 2122019 | 2.5 | 2 | 0.587 |
| 2122119 | 3 | 2.5 | 0.587 |
| 2327619 | 3.25 | 2.75 | 0.587 |
| 2122219 | 3.5 | 3 | 0.587 |
| 2326419 | 4 | 3.25 | 0.78 |
| 2360419 | 4.5 | 3.75 | 0.78 |
| 2326519 | 5 | 4.25 | 0.78 |
| 2326619 | 6 | 5.25 | 0.78 |
| 2361919 | 7 | 6.25 | 0.78 |
| 2361719 | 8 | 7.25 | 0.78 |
