Skip to content

PARKER AF WIPER SEAL

    AF Wiper Seal

    Descriptions

    The profile AF Ultrathan® wiper ring serves the purpose of preventing the penetration
    of dust, dirt, sand, and metal swarf into hydraulic cylinders. This reduces the risk of
    scoring caused by contaminants from external sources imbedded in the sliding parts.
    The excellent wiping effect is achieved by the special design of the wiper lip.
    The proven PU-compound P5008 stands for high abrasion resistance, minor permanent deformation, and robustness vis-a-vis external mechanical impact. By means
    of a press fit of the metal scan vis-a-vis the external diameter of the seal housing,
    the wiper is securely held in place in the axially open installation housing. Thanks to
    the flush end fit of the wiper lip with the cylinder head the lip enjoys a high degree of
    protection against damage from external causes.
    Profile AF provides a proper sealing end device from an engineering point of view and,
    in conjunction with our rod seals profiles B3 and BU constitutes a sealing system that
    has been tried and proven under the toughest field conditions.

    Features

    • Robust seal profile for harshest operating conditions.
    • Extreme wear resistance.
    • Suitable for fully automatic installation.
    • Dimensions according to DIN ISO 6195,
    Type B.
    • Simple fabrication of the housing.

    Range of application
    Hydraulic cylinders and valves.

    Operating temperature -35 °C to +100 °C
    Sliding speed ≤ 2 m/s

    Compounds
    Standard material of the elastomer part is Ultrathan® P5008, a polyurethane-based
    Parker compound with a hardness of approx. 93 Shore A. In comparison with other
    polyurethane materials currently available on the market, it excels because of its increased heat and wear resistance.
    Installation
    The profile AF Ultrathan® wiper rings are manufactured with a slightly oversized outer
    diameter D, thus ensuring a secure press fit in the groove D
    H8 after installation. Any
    contact of the wiper lip with piston rod eyes or other connecting parts should be avoided.

    dDLa
    203071
    253571
    304061
    364861
    405071
    405261
    455571
    45607.51
    506071
    50657.51
    56707.51
    57.1569.967.921.5
    607071
    607481.5
    60750.7
    637371
    63787.51
    657981.5
    658050.7
    69.8595.412.72
    708071
    708481.5
    70857.51
    718650.7
    758571
    758981.5
    759050.7
    76.596.5102
    809071
    809481.5
    809550.7
    80100102
    82.55108.0812.72
    859571
    859981.5
    85105102
    9010071
    9010481.5
    9010561
    90110102
    9510981.5
    10011481.5
    10011571
    10011591.5
    100120102
    101.611481.5
    11012591.5
    11012691.5
    110130102
    12014081.5
    120140102
    12514092