跳至正文

PARKER AM WIPER SEAL

    AM Wiper Seal

    Descriptions

    Because of their special profile, the profile AM wiper rings prevent the penetration
    of dust, dirt, grains of sand and metal swarf. Scoring is avoided to a great extent.
    Therefore sliding surfaces will be protected, the service life of the seals will be extended.
    Oversized diameters ensure a tight fit when assembled and prevent the penetration
    of foreign particles at the outer diameter of the wiper. The profile AM wiper rings will
    provide a neat closure at the cylinder; no special screwrings or holding plates are
    required.

    Features

    • Good wear resistance.
    • Suitable for fully automatic installation.
    • High temperature resistance in case of
    suitable compound selection.
    • Excellent media resistance in case of
    suitable compound selection.

    Range of application
    Hydraulic and pneumatic cylinders, valve lifters etc.

    Operating temperature -35 °C to +100 °C
    Pneumatics -35 °C to +80 °C
    Sliding speed ≤ 2 m/s

    Compounds
    Standard compound for the rubber part of the wiper is a NBR elastomer with a hardness of approx. 90 Shore A (Z5053). Additionally, a large number of dimensions is also
    available with FKM elastomer (Z5066).
    Installation
    The profile AM wiper rings are manufactured with a slightly oversized outer diameter
    D, thus ensuring a secure press fit in the groove D
    H8 after installation. Any contact of
    the wiper lip with piston rod eyes or other connecting parts should be avoided.

    dDHh/La
    6134.530.6
    10164.530.6
    1020851
    1220640.8
    1222851
    1422430.6
    1622430.6
    1626851
    18281071.4
    202853.50.8
    2030640.8
    20301071.4
    2228951
    22321071.4
    2435851
    25351071.4
    28401071.4
    3040851
    30401071.4
    3245840.8
    32451071.4
    35451071.4
    36451071.4
    3646851
    4050851
    40501071.4
    42521071.4
    45551071.4
    45601071.4
    5056851
    5060851
    50601071.4
    5065851
    55631071.4
    55651071.4
    5666851
    56661071.4
    60701071.4
    6074850.8
    63751071.4
    6383851
    65751071.4
    70801071.4
    75851071.4
    80901071.4
    8494851
    85951071.4
    90100751
    901001071.4
    951061071.4
    100110751
    1001101071.4
    1101201071.4
    1151251071.4
    1201301071.4
    1251401291.8
    1301451291.8
    1401551291.8
    1501661281.8
    1601761281.8
    1651801281.8
    17018514102
    18019514102
    20022016122.4
    24026016122.4