跳至正文

PARKER B3 ROD SEAL

    B3 Rod Seal

    Descriptions

    The profile B3 Ultrathan® rod seal is a lipseal which fits in the groove. These seals
    may be used for all applications where the physical properties of normal or fabric
    reinforced elastomers are insufficient.

     

    Features

    • Robust seal profile for harshest operating conditions.
    • Extreme wear resistance.
    • Easier installation.
    • Insensitive to pressure peaks.
    • High extrusion resistance.
    • Excellent media resistance in case of
    suitable compound selection.
    • Suitable compounds available for
    special requirements of the chemical
    process industry.
    • Suitable compounds available for special requirements of the food processing
    industry.
    • Dimensions according to ISO 5597.
    • Installation in closed and undercut
    housings.
    • Low compression set.
    • Additional sizes of machined products
    available on short notice.

    Range of application
    Mainly for the sealing of piston rods and plungers in heavy duty applications in mobile and stationary hydraulics. The dimensions mainly conform to the requirements of
    ISO 5597 and ISO 3320 for housing and diameters respectively.

    Operating pressure ≤ 400 bar
    Operating temperature -35 °C to +110 °C
    Sliding speed ≤ 0.5 m/s
    Media Hydraulic oils based on mineral oil

    Compounds
    The Ultrathan® P5008 compound is a Parker material based on polyurethane with a
    hardness of approx. 93 Shore A. Its main advantages in comparison with other polyurethane materials currently available on the market are the increased heat resistance
    and the lower compression set.
    For media containing water, we recommend our hydrolysis resistent polyurethane
    compound P5001.
    Installation
    The seals should have an axial clearance (see columns H and L). To avoid damage at
    the sealing lips, the seals should not be pulled over sharp edges during installation.
    Normally these seals may be snapped into closed grooves. Where access is restricted
    special assembly tools may be required. Proposals for the design of such tools will be
    provided on request. For gap sizes see chapter “Maximum Gap Allowance”

    dDHL
    41267
    61355.6
    6145.76.3
    81455.6
    8165.76.3
    914.555.6
    9165.76.3
    10143.74.2
    10164.55.2
    10175.76.3
    10185.76.3
    121955.6
    12205.76.3
    12227.38
    142155.6
    14227.38
    14247.38
    142489
    14.2820.73.53.9
    152566.7
    152589
    162255.6
    16245.76.3
    16267.38
    182455.6
    182555.6
    18265.76.3
    18287.38
    182889
    19.0525.46.357.14
    202655.6
    20285.76.3
    20307.38
    222855.6
    222955.6
    22305.76.3
    22327.38
    253267
    25335.76.3
    25336.57.3
    253389
    25357.38
    25401011
    25401112
    28365.76.3
    283689
    28387.38
    28381011
    284311.412.5
    30385.76.3
    303889
    30407.38
    30401011
    30451011
    324067
    32406.77.5
    32427.38
    32421011
    32451011
    32471011
    34.947.69.911
    354366.7
    354578
    35451011
    36445.76.3
    36467.38
    38501011
    38.150.89.5310.3
    40485.76.3
    404889
    40507.38
    405089
    40501011
    41.2250.88.39.1
    42527.38
    42.25529.510.5
    45535.66.3
    455389
    45531011
    45555.86.5
    45557.38
    45551011
    4557910
    456011.412.5
    505889
    50607.38
    50601011
    50631011
    506511.412.5
    50701415.5
    50.863.59.510.3
    556389
    55657.38
    55651011
    55651213
    55701011
    56666.57.5
    56718.69.5
    567111.412.5
    57.1569.859.5310.3
    58687.38
    606889
    60701011
    60751011
    60.3373.039.5310.3
    63736.57.3
    63731213
    63751011
    63781011
    637811.412.5
    63.576.29.5310.3
    657389
    657578
    65751213
    65781011
    65801213
    69.882.69.7510.5
    707889
    70806.57.5
    708077.8
    70801213
    70828.79.7
    708511.412.5
    758578
    75851213
    75881011
    75901011
    75901213
    768867
    76.288.99.5310.3
    78868.59.5
    809078
    80901011
    80901213
    80951011
    809511.412.5
    801001213
    801051213
    85100910
    851001213
    851051213
    88.9101.69.5310.3
    901006.57.5
    90102910
    90105910
    9010511.412.5
    9010511.412.5
    901101213
    9011014.516
    921059.510.6
    95110910
    951101011
    951151213
    100115910
    10012011.512.5
    10012014.516
    101.6117.489.5310.3
    1051201011
    10512011.412.5
    10512514.516
    110125910
    1101259.610.6
    1101301213
    11013014.516
    114.3130.189.5310.3
    11513511.512.5
    12013514.516
    1201401516
    1251451213
    12514514.516
    125.1140.59.810.9
    1301501213
    1301501516
    139.7155.589.5310.3
    14015067
    1401559.610.6
    14016014.516
    14516514.516
    1501701516
    152.4171.4512.713.49
    1601801516
    16018518.220
    17020018.220
    1802001516
    18020518.220
    1902101516
    2002201213
    20022518.220
    2002301819
    2102301516
    22025022.725
    2252501819
    25028022.725
    2803001516
    28031022.725
    39042022.725