Skip to content

PARKER B7 PISTON SEAL

    B7 Piston Seal

    Descriptions

    The profile B7 Ultrathan® piston seal is a lipseal which fits tightly in the groove. This
    seal may be used for all applications where the physical properties of normal or fabric
    reinforced elastomers are insufficient.

    Features

    • Robust seal profile for harshest operating conditions.
    • Extreme wear resistance.
    • Easier installation.
    • Suitable for fully automatic installation.
    • Assembly on one-part piston is possible.
    • Insensitive to pressure peaks.
    • High extrusion resistance.
    • Excellent media resistance in case of
    suitable compound selection.
    • Suitable compounds available for
    special requirements of the chemical
    process industry.
    • Suitable compounds available for special requirements of the food processing
    industry.
    • Dimensions according to ISO 5597.
    • Installation in closed and undercut
    housings.
    • Additional sizes of machined products
    available on short notice.

    Range of application
    Mainly for the sealing of pistons in heavy duty applications in mobile and stationary
    hydraulics.

    Operating pressure ≤ 400 bar
    Operating temperature -35 °C to +110 °C
    Sliding speed ≤ 0.5 m/s
    Media Hydraulic oils based on mineral oil

    Compounds
    The Ultrathan® P5008 compound is a Parker material based on polyurethane with a
    hardness of approx. 93 Shore A. Its main advantages in comparison with other polyurethane materials currently available on the market are the increased heat resistance
    and the lower compression set.
    For media containing water, we recommend our hydrolysis-resistant polyurethane
    compound P5001.
    Installation
    The seals should have an axial clearance (see columns H and L). To avoid damage at
    the sealing lips, the seals should not be pulled over sharp edges during installation.
    Normally these seals may be snapped into closed grooves. Where access is restricted
    special assembly tools may be required. Proposals for the design of such tools will be
    provided on request.

    DdHL
    15104.24.7
    1685.76.3
    16105.76.3
    20124.24.7
    20125.76.3
    221289
    24165.76.3
    25157.38
    25174.55
    25175.76.3
    251855.6
    272078
    282078
    32227.38
    32245.76.3
    322555.6
    34228.59.5
    352566.8
    35257.38
    38.130.15.76.3
    39297.38
    40281011
    40307.38
    40301011
    40325.76.3
    403389
    43337.38
    45357.38
    50351011
    503511.412.5
    50407.38
    50401011
    50425.76.3
    50.841.176.27
    52427.38
    54445.56.1
    54447.38
    55457.38
    574111.412.5
    60507.38
    60501011
    63488.69.5
    634811.412.5
    63537.38
    63555.76.3
    65557.38
    67577.38
    68589.510.5
    70607.58.2
    70601213
    75638.79.5
    806014.516
    80658.69.5
    806511.412.5
    80706.77.5
    80701213
    907511.412.5
    958011.412.5
    1008014.516
    1008511.412.5
    100889.510.5
    100906.77.5
    1109089
    110901516.5
    1159814.516
    12010511.412.5
    121111.19.510.5
    12510018.220
    12510514.516
    1251109.610.6
    1451151820
    152.4136.51011
    16013518.220
    16014014.516
    1801501820
    20017022.725
    20017518.220
    2001859.610.6
    2202001516.5
    2402151516.5
    25022022.725
    25022518.220
    2502301516.5
    27024022.525
    31028022.725
    3202902022