Hallite rod seal 620
Technical details
| OPERATING CONDITIONS | METRIC | INCH |
| Maximum Speed | 1.0 m/sec | 3.0 ft/sec |
| Temperature Range | -45°C +110°C | -50°F +230°F |
| Maximum Pressure | 400 bar | 6000 psi |
| MAXIMUM EXTRUSION GAP | | | |
| Pressure bar | 160 | 250 | 400 |
| Maximum Gap mm | 0.60 | 0.50 | 0.40 |
| Pressure psi | 2400 | 3750 | 6000 |
| Maximum Gap in | 0.024 | 0.020 | 0.016 |
| SURFACE ROUGHNESS | µmRa | µmRz | µmRt | µinRa | µinRz | µinRt |
| Dynamic Sealing Face Ød₁ | 0.1 – 0.4 | 1.6 max | 4 max | 4 – 16 | 63 max | 157 max |
| Static Sealing Face ØD₁ | 1.6 max | 6.3 max | 10 max | 63 max | 250 max | 394 max |
| Static Housing Faces L₁ | 3.2 max | 10 max | 16 max | 125 max | 394 max | 630 max |
| RADII | |
| Groove Section ≤ S in | 0.125 | 0.187 |
| Min Chamfer C in | 0.093 | 0.093 |
| Max Fillet Rad r₁ in | 0.008 | 0.008 |
| Max Fillet Rad r₂ in | 0.016 | 0.016 |
| TOLERANCES | ØD₁ | Ød₁ | L₁ |
| in | f9 | Js11 | +0.010 -0 |
Product List
| INCH |
PART
No. | Ød₁ | ØD₁ | SL | L₁
+0.010-0 |
| 4498600 | 0.625 | 0.875 | 0.16 | 0.176 |
| 4528700 | 0.625 | 0.875 | 0.175 | 0.19 |
| 4459900 | 0.625 | 0.875 | 0.25 | 0.275 |
| 4583900 | 0.75 | 1 | 0.187 | 0.207 |
| 4498500 | 0.75 | 1 | 0.25 | 0.275 |
| 4709100 | 0.875 | 1.125 | 0.187 | 0.207 |
| 4477200 | 1 | 1.24 | 0.187 | 0.217 |
| 4457500 | 1 | 1.25 | 0.187 | 0.197 |
| 4498400 | 1 | 1.25 | 0.25 | 0.275 |
| 4410400 | 1 | 1.375 | 0.25 | 0.275 |
| 4584000 | 1 | 1.375 | 0.312 | 0.344 |
| 4461100 | 1.125 | 1.375 | 0.25 | 0.275 |
| 4410500 | 1.125 | 1.5 | 0.25 | 0.275 |
| 4398900 | 1.25 | 1.5 | 0.187 | 0.207 |
| 4461000 | 1.25 | 1.5 | 0.25 | 0.275 |
| 4410600 | 1.25 | 1.625 | 0.312 | 0.344 |
| 4410700 | 1.375 | 1.75 | 0.312 | 0.344 |
| 4750600 | 1.5 | 1.875 | 0.375 | 0.413 |
| 4460000 | 1.75 | 2.125 | 0.375 | 0.413 |
| 8907600 | 2 | 2.5 | 0.25 | 0.275 |
