Hallite rod seal 658
Technical details
| OPERATING CONDITIONS | METRIC | INCH |
| Maximum Speed | 1.0 m/sec | 3.0 ft/sec |
| Temperature Range | -45°C +110°C | -50°F +230°F |
| Maximum Pressure | 400 bar | 6000 psi |
| MAXIMUM EXTRUSION GAP | | | |
| Pressure bar | 160 | 250 | 400 |
| Maximum Gap mm | 0.60 | 0.50 | 0.40 |
| Pressure psi | 2400 | 3750 | 6000 |
| Maximum Gap in | 0.024 | 0.020 | 0.016 |
| SURFACE ROUGHNESS | µmRa | µmRz | µmRt | µinRa | µinRz | µinRt |
| Dynamic Sealing Face Ød₁ | 0.1 – 0.4 | 1.6 max | 4 max | 4 – 16 | 63 max | 157 max |
| Static Sealing Face ØD₁ | 1.6 max | 6.3 max | 10 max | 63 max | 250 max | 394 max |
| Static Housing Faces L₁ | 3.2 max | 10 max | 16 max | 125 max | 394 max | 630 max |
| CHAMFERS & RADII | | | |
| Groove Section ≤ S in | 0.125 | 0.187 | 0.250 |
| Min Chamfer C in | 0.093 | 0.093 | 0.125 |
| Max Fillet Rad r₁ in | 0.008 | 0.008 | 0.016 |
| Max Fillet Rad r₂ in | 0.016 | 0.016 | 0.032 |
| TOLERANCES | ØD₁ | Ød₁ | L₁ |
| in | f9 | Js11 | +0.010 -0 |
Product List
Part
No. | Ød1 | ØD1 | SL | L₁
+0.010-0 |
| 4472400 | 0.75 | 0.937 | 0.156 | 0.172 |
| 4527500 | 0.875 | 1.125 | 0.187 | 0.207 |
| 4569000 | 1 | 1.25 | 0.187 | 0.207 |
| 4549400 | 1.062 | 1.302 | 0.187 | 0.207 |
| 4466200 | 1.125 | 1.367 | 0.187 | 0.207 |
| 4359610 | 1.25 | 1.49 | 0.197 | 0.217 |
| 4747600 | 1.25 | 1.625 | 0.375 | 0.413 |
| 4392210 | 1.375 | 1.615 | 0.197 | 0.217 |
| 4747700 | 1.375 | 1.75 | 0.375 | 0.413 |
| 4480600 | 1.5 | 1.74 | 0.187 | 0.207 |
| 4386020 | 1.5 | 1.875 | 0.295 | 0.324 |
| 4747800 | 1.5 | 1.875 | 0.375 | 0.413 |
| 4456200 | 1.75 | 2.118 | 0.283 | 0.311 |
| 4576700 | 1.875 | 2.246 | 0.281 | 0.311 |
| 4466300 | 2 | 2.37 | 0.281 | 0.311 |
| 4576800 | 2.5 | 2.871 | 0.281 | 0.311 |
