Hallite rod seal 673
Technical details
| OPERATING CONDITIONS | METRIC | INCH |
| Maximum Speed | 1.0 m/sec | 3.0 ft/sec |
| Temperature Range | -45°C +110°C | -50°F +230°F |
| Maximum Pressure | 400 bar | 6000 psi |
| Maximum Pressure with Backup Ring | 700 bar | 10000 psi |
| MAXIMUM EXTRUSION GAP | |||
| Pressure bar | 160 | 250 | 400 |
| Maximum Gap mm | 0.60 | 0.50 | 0.40 |
| Pressure psi | 2400 | 3750 | 6000 |
| Maximum Gap in | 0.024 | 0.020 | 0.016 |
| SURFACE ROUGHNESS | µmRa | µmRz | µmRt | µinRa | µinRz | µinRt |
| Dynamic Sealing Face Ød₁ | 0.1 – 0.4 | 1.6 max | 4 max | 4 – 16 | 63 max | 157 max |
| Static Sealing Face ØD₁ | 1.6 max | 6.3 max | 10 max | 63 max | 250 max | 394 max |
| Static Housing Faces L₁ | 3.2 max | 10 max | 16 max | 125 max | 394 max | 630 max |
| CHAMFERS & RADII | ||||
| Groove Section <S mm | 4.00 | 5.00 | 7.50 | 10.00 |
| Min Chamfer C mm | 3.00 | 3.50 | 5.00 | 6.50 |
| Max Fillet Rad r₁ mm | 0.20 | 0.40 | 0.80 | 0.80 |
| Max Fillet Rad r₂ mm | 0.40 | 0.80 | 1.20 | 1.20 |
| TOLERANCES | Ød₁ | ØD₁ | L₁ |
| mm | f9 | Js11 | +0.25 -0 |
Product List