Skip to content

KASTAS K96 ROD SEAL

    KASTAS ROD SEALS K96

    K96 is a single acting rod seal designed to have special geometry and inner lip shorter than the outer lip.

     PRODUCT ADVANTAGES
    Superior static and dynamic sealing effect
    Easy assembly into closed grooves
    Able to work on hard conditions
    Very good static tightness due to the geometry
    Can go up to a pressure of 250 bar with using a back-up ring

    APPLICATION
    Construction machinery, fork-lift trucks and standard cylinders.

    MATERIAL CODE
    NBR90 SHORE ANB9001
    OPERATING CONDITIONS
    MEDIAMineral oils
    (DIN 51524)
    HFA and HFBHFC
    TEMPERATURE-30°C
    +105°C
    +5°C
    +60°C
    -30°C
    +60°C
    PRESSURE≤150 Bar≤150 Bar≤150 Bar
    SPEED≤0.5 m/sec≤0.5 m/sec≤0.5 m/sec
    SURFACE ROUGHNESS RaRmax
    Sliding SurfaceØd≤0.4 μm≤3.2 μm
    Groove BaseØD≤1.8 μm≤10 μm
    Groove FlanksB≤3 μm≤16 μm

    INSTALLATION
    Easily assembled into closed grooves. It is very important that the assembly tools must be of soft material and have no sharp edges.Before installation the wiper must be oiled with system oil.

    NOTES
    K96 can be produced on requests inFKM material for special applications that requires high temperatures. It is generally used with 2mm PTFE back-up rings in construction machinery. The permissible sealing gap values of K96 rod seal is given in the below table.

    PERMISSIBLE SEALING GAP
     Smax (mm)
    t=(D-d)/2 (mm)50 bar 100 bar 150 bar
    t≤50.400.200.10
    t>50.450.250.15

    KASTAŞ NOd(f8)D(H11)B(-0/+0.2)bn
    K96-0404050874.5
    K96-0454555874.5
    K96-050506311105
    K96-055556811105
    K96-065657811105
    K96-070708311105
    K96-075758811105
    K96-080809311105
    K96-0858510011105.5
    K96-0909010511105.5
    K96-0959511011.510.55.5
    K96-10010011511105.5
    K96-11011013011106
    K96-12012014011106
    K96-14014016013126
    K96-140/114016011106
    K96-18018020013126