MGM – ROD SEAL
Single acting rod seal, suitable for heavy duty application, seal set consists of three elements: a) sealing element-high specification NBR80º shore; b) header-polyester elastomer or NBR impregnated cotton; c) anti-extrusion ring-acetal. For convenience of site replacement, these seals can be supplied split. The split is designed, in such a manner, as to minimize leakage.
Maximum operating conditions | ||
Temp℃ | Pressure | Speed |
-30 | 10000PSI | 1.5 ft/sec |
+100 | 700BAR | 0.5 m/sec |
Lead in Chamfers | |
Ød | f |
0-60 | 4 |
60-120 | 5 |
120-180 | 6 |
180-250 | 8 |
250-400 | 10 |
METRIC | e9 >120e8 | js11 >120js10 | -0 +0.25 | +0 -0.20 | MAX |
ITEM | Ød | ØD | L | Ødg | R1 |
MGM | 20 | 33 | 20 | 20.4 | 0.4 |
MGM | 25 | 38 | 20 | 25.4 | 0.4 |
MGM | 30 | 43 | 20 | 30.4 | 0.4 |
MGM | 32 | 47 | 22.5 | 32.4 | 0.8 |
MGM | 35 | 45 | 25.5 | 35.4 | 0.4 |
MGM | 40 | 50 | 17.3 | 40.4 | 0.4 |
MGM | 40 | 55 | 22.5 | 40.4 | 0.8 |
MGM | 45 | 60 | 22.5 | 45.4 | 0.8 |
MGM | 45 | 80 | 45 | 45.4 | 0.8 |
MGM | 50 | 63 | 20 | 50.4 | 0.4 |
MGM | 50 | 65 | 22.5 | 50.4 | 0.8 |
MGM | 50 | 65 | 24.5 | 50.4 | 0.8 |
MGM | 50 | 70 | 30 | 50.4 | 0.8 |
MGM | 55 | 70 | 25 | 55.4 | 0.8 |
MGM | 60 | 75 | 22.5 | 60.4 | 0.4 |
MGM | 60 | 80 | 30 | 60.4 | 0.8 |
MGM | 63 | 83 | 27 | 63.4 | 0.8 |
MGM | 63 | 83 | 30 | 63.4 | 0.8 |
MGM | 70 | 83 | 25 | 70.4 | 0.4 |
MGM | 70 | 85 | 22.5 | 70.4 | 0.8 |
MGM | 70 | 90 | 30 | 70.4 | 0.8 |
MGM | 80 | 100 | 30 | 80.4 | 0.8 |
MGM | 90 | 105 | 25 | 90.4 | 0.8 |
MGM | 90 | 110 | 30 | 90.4 | 0.8 |
MGM | 100 | 120 | 30 | 100.4 | 0.8 |
MGM | 105 | 125 | 30 | 105.4 | 0.8 |
MGM | 115 | 130 | 30 | 115.4 | 0.4 |
MGM | 120 | 140 | 30 | 120.4 | 0.8 |
MGM | 125 | 145 | 30 | 125.4 | 0.8 |
MGM | 130 | 150 | 30 | 130.4 | 0.8 |
MGM | 140 | 160 | 28 | 140.4 | 0.8 |
MGM | 140 | 160 | 30 | 140.4 | 0.8 |
MGM | 160 | 180 | 28 | 160.7 | 0.8 |
MGM | 180 | 205 | 35 | 180.7 | 0.8 |
MGM | 200 | 225 | 35 | 200.7 | 0.8 |
MGM | 220 | 245 | 35 | 220.7 | 0.8 |
MGM | 250 | 275 | 35 | 250.7 | 0.8 |