Skip to content

HERCULES SG WIPER RINGS

    SG Wiper Rings

    Each Seal Guard Wiper consists of two flexible bronze rings which are held in place by a nitrile cushion ring. The cushion ring absorbs side loads and energizes the wiper to maintain close contact with the rod. Particularly suited for hostile environments, seal guard wipers shave off sand, grift, slag, flux, paint, moisture, chips and slivers. Seal Guard Wipers are long-lasting, self-adjusting, and offer low friction. Seal Guard Wipers can be installed in standard Hercules® Sealing Products “ST” or “D” Style grooves by increasing the “F” gland dimension to the “F” Throat Diameter shown.

    SEAL INFORMATION
    MATERIAL660 BRONZE
    70A NITRILE
    TEMPERATURE
    RANGE
    -40° TO +240° F
    Part NumberA
    Nom. ID
    B
    Nom. OD
    C
    Nom. Ht
    SG-0.500
    SG-0.625
    SG-0.750
    SG-0.875
    SG-1.000
    SG-1.125
    SG-1.250
    SG-1.375
    SG-1.500
    SG-1.625
    SG-1.750
    SG-2.000
    SG-2.250
    SG-2.500
    SG-3.000
    SG-3.500
    SG-4.000
    1/2
    5/8
    3/4
    7/8
    1
    1-1/8
    1-1/4
    1-3/8
    1-1/2
    1-5/8
    1-3/4
    2
    2-1/4
    2-1/2
    3
    3-1/2
    4
    3/4
    7/8
    1-1/8
    1-1/4
    1-3/8
    1-1/2
    1-5/8
    1-3/4
    1-7/8
    2
    2-1/8
    2-1/2
    2-3/4
    3
    3-1/2
    4
    4-1/2
    1/8
    1/8
    3/16
    3/16
    3/16
    3/16
    3/16
    3/16
    3/16
    3/16
    3/16
    1/4
    1/4
    1/4
    1/4
    1/4
    1/4