Skip to content

PARKER Z7 PNEUMATIC SEAL

    Pneumatic Seal Z7

    The profile Z7 pneumatic piston seal is a U-ring with an integral guiding surface for single-acting pistons.

    • Due to application-optimized geometry and compounds suitable for use in oiled as well as in oil-free air (after initial lubrication on assembly).
    • Multi-functional sealing element. The guiding area at the sealing element performs the guiding function in the cylinder. However, due to its geometry the sealing element is not suitable for absorption of high radial forces or long strokes.
    • Prevents metallic contact between the piston and cylinder. Ideal for light-metal and plastic cylinders (ridging).
    • Good wear resistance.
    • Smooth running due to optimum lubricant-retaining sealing lip geometry.
    • Easier installation.
    • Assembly on one-part piston is possible.
    • High temperature resistance in case of suitable compound selection.
    • Excellent media resistance in case of suitable compound selection.
    • Installation in open housings with retaining collar.

    Range of application
    Operating pressure≤ 16 bar
    Operating temperature-30 °C to +80 °C
    Sliding speed≤ 1 m/s
    MediaCompressed air, both lubricated and oil free (after greasing for fitting)

    Installation
    The profile Z7 pneumatic cylinder seals can be easily mounted by pulling them over the one-piece piston.Care should be taken that all edges are chamfered to avoid seal damage.

    D,d,H,d1,L1,L2,L3,R1,R2,
    1610813.59.5320.90.2
    1812815.59.5320.90.2
    2014817.59.5320.90.2
    2518922.59.5321.30.2
    2822825.59.5321.30.2
    3023927.510321.30.2
    3225929.510321.30.2
    3528932.510321.30.2
    4033937.510321.30.2
    4538942.510321.30.2
    5043947.510321.30.2
    54461051.511421.30.2
    6353136014.552.51.60.3
    6356960.510321.30.3
    70621067.511421.60.3
    80721077.411421.60.3
    8070147715.562.51.60.3
    1008816.596.51882.51.60.4
    10090129713.542.51.60.3